CollMot Robotics Documentation Site
Back to main site

Skybrush Live

    • Overview
    • Feature highlights
    • Hardware requirements
    • Software installation
    • Tutorials
      • Setup hardware for outdoor drone shows
        • Flash our firmware to your drones
        • Setup general autopilot parameters
        • Configure your light module
        • Configure your remote controller
        • Setup your wifi network
        • Setup your RTK base station
        • Configure Skybrush Server (advanced)
        • Find your drones in Skybrush Live
        • Unit test system components in Skybrush Live
      • Setup hardware for indoor drone shows
        • Flash our firmware to your drones
        • Setup communication
        • Setup your light module
        • Setup your positioning system
        • Configure Skybrush Server (advanced)
        • Find your drones in Skybrush Live
        • Unit test system components in Skybrush Live
      • Start a drone show in 10 steps with Skybrush Live
        • Connect to the Skybrush server
        • Load your show file
        • Fit the show to your venue
        • Assign drones to show trajectories
        • Setup geofence
        • Upload your mission to the drones
        • Approve preflight checks
        • Choose start time
        • Authorize start of the show
        • Start the show
    • Panels
      • Map
      • 3D View
      • Layers
      • Features
      • UAVs
      • Beacons
      • Docks
      • Light control
      • Show control
      • Clocks
      • Locations
      • Event log
    • Dialogs
      • Coordinate averaging
      • Geofence
      • License info
      • Offline maps
      • Parameter upload
      • Properties
      • RTK status
    • Widgets
      • UAV status
      • Altitude status
      • Battery status
      • RTK status
      • Weather info
      • Connections
      • Server connection
      • Geofence
      • Authentication
      • Broadcast mode
      • Toolbox
      • Preferences
        • Display settings
        • 3D view settings
        • UAV settings
        • Preflight settings
        • Server settings
        • API key settings
      • Audible alerts
      • Help
    • Troubleshooting Information
      • Troubleshooting Q&A
      • Light Status Codes
    • Appendix
      • ArduCopter SHOW parameters
      • Drone-specific firmware settings
      • ArduCopter show-specific log messages
      • Hotkeys
      • Glossary
Skybrush Live latest
  • Frequently Asked Questions
    • latest
  • Front page
    • latest
  • Skybrush Live
    • latest
    • 2.8.0
    • 2.7.1
    • 2.3.0
    • 2.2.0
    • 1.27.1
    • 1.25.0
    • 1.24.3
    • 1.21.0
  • Skybrush protocol specification
    • latest
  • Skybrush Sidekick
    • latest
  • Skybrush Studio for Blender
    • latest
  • Skybrush Live
  • Tutorials
latest 2.8.0 2.7.1 2.3.0 2.2.0 1.27.1 1.25.0 1.24.3 1.21.0

Tutorials

We carefully designed the tutorials below to guide you through all main processes involved in drone show operations. Please select from the list below:

  • Setup your hardware for indoor drone shows

  • Setup your hardware for outdoor drone shows

  • Start a drone show in 10 steps with Skybrush Live

Software installation Setup hardware for outdoor drone shows