Configure Skybrush Server (advanced)

If you are not working with the default settings as described above for all HW accessories, it is also possible to customize Skybrush Server configuration.

In case of a dedicated server device, switch the device off, remove the SD card on it and edit the /boot/collmot/skybrush.json configuration file as discussed with our team.

In case you installed Skybrush Server on your computer, edit the skybrush.jsonc file that can be found at the same place as your Skybrush Server executable (and your licence file).

Contact us for support on proper configuration as this should not be part of your setup process by default!