Glossary

Drone ID

The drone ID is a fixed unique physical ID that allows the permanent identification of the drone in the swarm. It is different from the show ID, which is a temporary value defining which show trajectory a given drone is assigned to.

Local map orientation

Local map orientation defines the direction of the positive x-axis of the relative (local flat Earth) coordinate system (usually in degrees clockwise from North (0=North, 90=East, 180=South, 270=West)). Local map orientation together with local map origin can be used to measure distances and orientations on the map view, or to express drone coordinates in human-readable meters from the origin along specific directions instead of absolute coordinates.

Local map origin

Local map origin is a set of geodetic coordinates (latitude, longitude), defining a convenient relative (local flat Earth) coordinate system for all kinds of measurement needs. Local map origin together with local map orientation can be used to measure distances and orientations on the map view, or to express drone coordinates in human-readable meters from the origin along specific directions instead of absolute coordinates.

Flight mode

The low level firmware of the drones provides different flight modes, which determine the overall behaviour of the drones. Such flight modes are position hold, return to home, land, or show (which is our custom mode for executing drone shows).

GCS

Ground control station

Physical ID

See Drone ID.

RTH

Return to home

RTK

Real-time kinematic (positioning)

Server time

Server time is the actual absolute time of the Skybrush Server. Server time should be synchronized to UTC in the preferred time zone at all times. Server time is displayed in the Clocks panel (abbreviated as SRV in the list of clocks).

Show flight mode

The custom flight mode in which drone shows are executed.

Show ID

Each drone has a permanent physical ID (sometimes named as drone ID) and a mission-specific show ID. The latter one defines which show trajectory is assigned to the given drone in the actual swarming flight. Show ID representations are always preceeded with an 's' to avoid confusion (e.g. s05).

Show orientation

Show orientation defines the direction of the positive x-axis of the show coordinate system (usually in degrees clockwise from North (0=North, 90=East, 180=South, 270=West)). If show orientation is changed, the show trajectories will be rotated with its value around the show origin.

Show origin

The show origin is a set of geodetic coordinates (latitude and longitude), defining the absolute origin of the show. If show origin is moved, the whole show will move with it, accordingly. Show origin should be setup together with show orientation to get the proper placement of your show on the actual field.

Show time

Show time is a time instance relative to the start of the show. It can be negative (before the show) or positive (after the show started). Show start can be setup in the Show control to a predefined absolute time value. Show time is displayed in the Clocks panel (abbreviated as SHOW in the list of clocks).

Skybrush Server

Skybrush Server is the backend part of Skybrush that connects to your drones, your RTK base station and other hardware accessories that might be needed for your missions. It ensures the smooth communication between all hardware elements and the connected Skybrush Live or Skybrush Sidekick clients. Skybrush Server is either running on the same computer as one of the clients or on a dedicated local HW device or in the cloud.

SKYC

.skyc stands for Skybrush Compiled format. It is our most common show definition file type that contains all information related to a drone show (all drone trajectories and light animations, pyro events, suggested geofence definitions, music, designer notes to the operators etc.). The .skyc format is fully supported by Skybrush Studio, our standalone show designer suite, but we provide .skyc exporter plugins for most of the well-known animation softwares (Blender, 3DSMax, Maya, Houdini). If your used designer software is not on the list, please contact us and we will create a plugin for you!