Flash our firmware to your drones
For Pixhawk-based drones our customized firmware needs to be uploaded to all your show drones to make them compatible with Skybrush Live.
The firmware is based on a recent version of ArduCopter, and we assume that the original firmware of your drone is also based on ArduCopter so most of the parameter settings on the drone should already be configured as necessary. Use Mission Planner or any other tool that supports flashing ArduCopter-based firmwares to upload our firmware to your drone.
If your drone did not use an ArduCopter-based firmware before or you used an older version of ArduCopter, the drone will start up with the factory defaults of the latest release and chances are high that quite a few parameters would have to be customized for a safe flight. Contact us if this is the case.